Plug 2 lamp cables to the connectors of inverter
board.
Use a Hex-head screwdriver screwed the DVI and
D-SUB connectors (No.1~4 Hex Nut screws
Size=M3x8;Torque=4~6KGFxCM).
Use a Phillips-head screwdriver screw 4 screws
(No1~4 Screw Size=M3x6;
Torque=2.5~3KGFxCM).
Use a Phillips-head screwdriver screw 3 screws
(No1~2 Screw Size=M3x10;No3 screw size=M3*6
Torque=4~6KGFxCM).
Stick the safety tape
Connect OSD key cable into interface board(P306)
Take out the USB cable to through out the hole.
Connect the USB cable.
Use a Phillips-head screwdriver screwed the
No.1~2(No1~2 screw size=M3x6; Torque=9~10
KGFxCM).
4. Assembly and Disassembly Procedures (continued)
S12
S11
S7
S9
S8
S10
S13
1
2
3
4
1
2
3
1
2
3
4
1
2
3
1
2
15
Go to cover page
ACER H233H
