English
8
Step 3 Test the scanner
Turn the scanner power on by depressing the power button on the
front panel of the scanner. You may notice that the scanner will start
to perform a self-test, and the LED indicators will blink for a few
seconds. Wait until the scanner completes its self-test (this is
indicated when the LED indicators stop blinking). You are now ready
to install the software for your new scanner.
Step 4. Install Scanner Driver Software
Resume the power connection of your computer and turn on the
power.
Install scanner driver and other applications
1. After you power on your computer, the “New hardware found”
message box will appear on the screen, then the “Update Device
Driver Wizard” dialogue box will pop up. Click “Cancel” to close the
dialogue box.
2. Insert the scanner software CD-ROM Disc 1 into your CD-ROM
drive. The software installation menu will appear on the screen
automatically after a few seconds.
3. If the software installation menu does not appear, please do the
following:
(1) Double-click "My Computer" icon on your desktop.
(2) In “My Computer” window, double-click your CD-ROM drive icon.
4. MiraPhoto is the driver program for your scanner. Select
"MiraPhoto" and then follow the instructions on the screen to install.
You can then choose to install other application programs. When you
install, please follow the instructions of each software installer to
proceed.
5. When installation is done, restart your computer. The scanner will
be detected automatically.
Summary of Contents for Film Scanner
