background image

11

Eng

lis

h

FCC notice

This device has been tested and found to comply with the limits for a 
Class B digital device pursuant to Part 15 of the FCC Rules. These limits 
are designed to provide reasonable protection against harmful 
interference in a residential installation. This device generates, uses, 
and can radiate radio frequency energy and, if not installed and used 
in accordance with the instructions, may cause harmful interference to 
radio communications.

However, there is no guarantee that interference will not occur in a 
particular installation. If this device does cause harmful interference to 
radio or television reception, which can be determined by turning the 
device off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the device and receiver.

Connect the device into an outlet on a circuit different from that 
to which the receiver is connected.

Consult the dealer or an experienced radio/television technician 
for help.

Notice: Shielded cables

All connections to other computing devices must be made using 
shielded cables to maintain compliance with FCC regulations.

Notice: Peripheral devices

Only peripherals (input/output devices, terminals, printers, etc.) 
certified to comply with the Class B limits may be attached to this 
equipment. Operation with non-certified peripherals is likely to result 
in interference to radio and TV reception.

Caution: Changes or modifications not expressly approved 
by the manufacturer could void the user's authority, which 
is granted by the Federal Communications Commission, to 
operate this device.

Summary of Contents for ezDock





















Reviews: