Acer Extensa 710 User Manual Download Page 101

Page: 101 / 136

Notebook Manager

Chapter 5 Software

❑

Enable system resume timer. Select to allow the
computer to wake-up from standby mode if the resume
timer is set and matched.

❑

System Resume Timer. (When Enable system resume
timer is selected) click on the button to set the System
Resume Timer.

Display Device

Display Device is used to control various settings related to
display device(s), such as the display brightness/contrast
levels.

The items in this screen include:

❑

Boot Display Device. Sets the default display device on
boot-up.

❑

Switching Display Device. Sets the current display
device.

Note:

Make sure an external monitor is connected before

External monitor is selected.

700-e.book : 700-5e.fm Page 81 Wednesday, April 22, 1998 11:18 AM

Summary of Contents for Extensa 710









































































































































Search results

Summary of Contents for Extensa 710

Reviews:

Related manuals for Extensa 710

Brands by name

Popular brands

Acer Extensa 710, User Manual

Search results

Summary of Contents for Extensa 710

Reviews:

Related manuals for Extensa 710

Brands by name

Popular brands