Acer Extensa 710 User Manual Download Page 14

Page: 14 / 136

Preface

xiv

Connecting the Computer

Connecting the computer is as easy as 1-2-3.

Slide out the battery compartment cover and insert the
battery pack into the battery compartment. Then slide
the battery compartment cover in place.

The battery pack has a pull loop at the end for easy
removal.

Connect one end of the AC adapter to the DC-in port on
the computer’s rear panel and the other end to a
properly grounded power outlet.

Note:

When using a battery pack for the first time, fully

recharge the battery, then disconnect the adapter to use
up the battery before recharging again. You only need to
do this once with a new battery.

700-e.book : 700-ePRE.fm Page xiv Wednesday, April 22, 1998 11:18 AM

Summary of Contents for Extensa 710









































































































































Search results

Summary of Contents for Extensa 710

Reviews:

Related manuals for Extensa 710

Brands by name

Popular brands

Acer Extensa 710, User Manual

Search results

Summary of Contents for Extensa 710

Reviews:

Related manuals for Extensa 710

Brands by name

Popular brands