Acer Extensa 710 User Manual Download Page 58

Page: 58 / 136

Battery Pack

User’s Guide

The following table shows the recommended course of
action to take when you encounter a battery-low condition.

Situation

Recommended Action

AC adapter
and power
outlet available

1. Connect the AC adapter to the computer.

2. Save all necessary files.

3. Resume work.

Power off the computer if you wish to
recharge the battery rapidly.

An extra fully-
charged
battery pack
available

1. Save all necessary files.

2. Exit the application.

3. Power off the computer.

4. Replace the battery pack.

5. Power on the computer and resume work.

1. Save all necessary files.

2. Enter Hibernation mode.

3. Install the extra battery pack.

4. Resume from Hibernation mode.

AC adapter or
power outlet
not available

1. Save all necessary files.

2. Exit the application.

3. Power off the computer.

1. Save all necessary files.

2. Enter Hibernation mode.

700-e.book : 700-2e.fm Page 38 Wednesday, April 22, 1998 11:18 AM

Summary of Contents for Extensa 710









































































































































Search results

Summary of Contents for Extensa 710

Reviews:

Related manuals for Extensa 710

Brands by name

Popular brands

Acer Extensa 710, User Manual

Search results

Summary of Contents for Extensa 710

Reviews:

Related manuals for Extensa 710

Brands by name

Popular brands