Acer e-mill 3VK, Operation Manual

Page: 11 / 203

- 1 0 -
Common grounds:
Never groun d equipment as
shown in the lower figure (FORBADE!) :
(Wrong)
1-3-2. Environmental conditions
Generally, the machine will be installed at the places wi th the following conditions.
However, these may change over a period of time or in response to seasonal
changes.
1) Supply voltage : 90% to 110% of nominal supply voltage
2) Source frequency : ±2hz of nominal frequency
3) Ambient temperature : 0
℃
to 45
℃
(32
℉
to 113
℉
)
4) Relative humidity : Less than 80%
Temperature changes should not cause condensation.
5) Atmosphere: Free from excessive dust, acid fumes corrosive gases and salt.
6) It should be avoided to expose the machine to direct sunlight or he at rays which
can change the surrounding temperature.
7) Avoid exposing the milling machine to abnormal vibration.
***If it is difficult to observe or meet these conditions, please contact us
immediately.
1-4. Safety Precaution
This machine is provided with a number of safety devices to protect operator and
equipment from being injured and damaged. Operators should not, however, rely
solely upon these safety devices but should operate the machine after fully
understanding what special precautions to take by rea ding the following details
thoroughly.
Resistance to ground = 100 the
number of devices connected to the
grounding (Ω)