background image

iii

Information for your safety and 

comfort

Read these instructions carefully. Keep this document for future reference. 
Follow all warnings and instructions marked on the product.

Turning the product off before cleaning

Unplug this product from the wall outlet before cleaning. Do not use liquid 
cleaners or aerosol cleaners. Use a damp cloth for cleaning.

Caution for plug as disconnecting device

Observe the following guidelines when connecting and disconnecting power to 
the external power supply unit:

Install the power supply unit before connecting the power cord to the AC 
power outlet.

Unplug the power cord before removing the power supply unit from the 
projector.

If the system has multiple sources of power, disconnect power from the 
system by unplugging all power cords from the power supplies.

Caution for Accessibility

Be sure that the power outlet you plug the power cord into is easily accessible 
and located as close to the equipment operator as possible. When you need to 
disconnect power to the equipment, be sure to unplug the power cord from the 
electrical outlet.

Warnings!

Do not use this product near water.

Do not place this product on an unstable cart, stand or table. If the product 
falls, it could be seriously damaged.

Slots and openings are provided for ventilation to ensure reliable 
operation of the product and to protect it from overheating. These 
openings must not be blocked or covered. The openings should never be 
blocked by placing the product on a bed, sofa, rug or other similar surface.

This product should never be placed near or over a radiator or heat 
register, or in a built-in installation unless proper ventilation is provided.

Never push objects of any kind into this product through cabinet slots as 
they may touch dangerous voltage points or short-out parts that could 
result in a fire or electric shock. Never spill liquid of any kind onto or into 
the product.

To avoid damage of internal components and to prevent battery leakage, 
do not place the product on a vibrating surface.

Summary of Contents for D4K2107
























































Reviews: