22
5.2. Do factory reset in user menu.
(1)Restart the monitor after open factory menu. And then open the user menu.
(2)Factory reset will turn off “Burn in” mode which screen color switches among red, green, blue and black.
6. Troubleshooting.
6.1. Can’t Entry ISP Mode!!
(1) Check the cables and ISP JIG are connected fluently.
(2) Click the “Dis Con” and click “Connect” again.
(3) AC off the monitor for a while and retry it.
(4) Change other vervion ISP program.
(4)Change ISP JIG or cable.
(5)Change PC.
Summary of Contents for B227Q
Page 8: ...8 S5 Remove the screws to separate the panel and the Middle Frame and the DECO BEZEL...
Page 10: ...10 S7 Remove the main board and power board Disconnect the cables...
Page 21: ...21 4 Do Auto Color in factory mode Check this F W version...
Page 27: ...27 5 4 Set other setting and type the 22 digit S N...
