11
2.2 Assembly Procedures:
4.1 Assembly Procedures:
S1. Prepare a main board, a power board, an USB board and some essential cables. Connect every cable
as the below picture.
S2. Use a screwdriver to tighten the screws till the power board with shield are firmly attached then put the
mylar with main board aim at the two screw bolts of mainframe and tighten the screws of main board and USB
board.
Summary of Contents for B227Q
Page 8: ...8 S5 Remove the screws to separate the panel and the Middle Frame and the DECO BEZEL...
Page 10: ...10 S7 Remove the main board and power board Disconnect the cables...
Page 21: ...21 4 Do Auto Color in factory mode Check this F W version...
Page 27: ...27 5 4 Set other setting and type the 22 digit S N...