14
S5. Put the Mylar slice
(
Note
:
refer to last page
)
marked the information of mainframe position on the
panel. Mylar slice edge must be against the bezel. Put the mainframe along the mark. Holding the mainframe
while you are removing the Mylar and pasting the tapes.
S6.Prepare a rear cover and a key board and use the screws to lock the key board.
Summary of Contents for B227Q
Page 8: ...8 S5 Remove the screws to separate the panel and the Middle Frame and the DECO BEZEL...
Page 10: ...10 S7 Remove the main board and power board Disconnect the cables...
Page 21: ...21 4 Do Auto Color in factory mode Check this F W version...
Page 27: ...27 5 4 Set other setting and type the 22 digit S N...