Diagnostic Utilities
2-8
8. SD Card
Insert an SD card into the device. The test starts automatically.
If the SD card read-write capability is successful, a hint dialog will be popped-up on screen to tell
user to remove tested SD card.
Remove the SD card, the status of this test item will be marked as green on status window. If user
ignores it until timeout, it will be judged as failed item and marked as red on status window.
Figure 2-11. SD Card Test
9. G-Sensor Test
The G-Sensor Test checks if a G-Sensor module is present or not. If a G-Sensor is preset, the test
will pass automatically.
Figure 2-12. G-Sensor Test