Acer AT2703, Service Manual

Page: 28 / 60

22 Chapter 1
Advanced Features
PIP / PBP / POP
Press the PIP / PBP / POP button once to display activate picture-in-picture (PIP). Press twice to
activate picture-by-picture (PBP). Press three times to activate picture-on-picture (POP). Then, the
POP screens will display the TV channel programs one by one.
NOTE: The OSD menu is not available in PIP / PBP / POP modes.
PIP 1. Press the Activate key to toggle between PIP
screens.
2. Press the TV , AV , SCART(COMPONENT) or PC
keys, number keys or CH up or down to change the
content of the active screen.
3. Press SWAP key to change the content between the
primary and the subscreen.
4. Press the POSITION key to select the location of the
subscreens, from the upper left
J
upper right
J
lower
right
J
lower left, as shown in the image.
5. Press the SIZE / MODE key to select the size of the
subscreen, from 25%
J
37.5%
J
50%, as shown in
the image.
3%33LFWXUHE\3LFWXUH 3,33LFWXUHLQ3LFWXUH 3233LFWXUHRQ3LFWXUH
6ZDS