Acer Aspire T3-100 User Manual Download Page 57

Page: 57 / 72

Returning your system to its factory

condition

In case your computer experiences problems that are

not recoverable by other methods, you may need to

reinstall everything to return your system to its factory

condition. You can reinstall using either your hard

drive or the recovery discs you have created.

•

If you can still run Windows OS, see

“Recovering

from within Windows OS” on page 47

•

If you cannot run Windows OS and your original

hard drive is still working, see

“Recovering from

the hard drive during startup” on page 48

•

If you cannot run Windows OS and your original

hard drive has been completely re-formatted or

you have installed a replacement hard drive, see

“Recovering from your recovery discs” on

page 48

Recovering from within Windows OS

To reinstall Windows OS and all pre-installed

software and drivers:

1 Click (

Start

All Programs

eMachines

, then click

eMachines Recovery Management

eMachines

Recovery Management

opens.

2 Click the

Restore

tab, then click

Restore system to

factory default

. The

Confirm Restoration

dialog box

opens.

3 Click

Yes

, then click

Start

. A dialog box displays

information about the hard drive that the

operating system will be recovered to.

Caution

This complete recovery deletes everything on your hard drive,

then reinstalls Windows and all software and drivers that were

pre-installed on your system. If you can access important files on

your hard drive, back them up now.

Caution

Continuing the process will erase all files on your hard

drive.

MU0000000_eM_ENG_V09A3.book Page 47 Wednesday, August 19, 2009 5:06 PM

Summary of Contents for Aspire T3-100









































































Search results

Summary of Contents for Aspire T3-100

Reviews:

Brands by name

Popular brands

Acer Aspire T3-100, User Manual

Search results

Summary of Contents for Aspire T3-100

Reviews:

Brands by name

Popular brands