Acer Aspire T100, Service Manual

Page: 42 / 113

Chapter 2 35
Video Off Method This item determines the manner in which
the monitor is blanked.
V/H SYNC+Blank: This selection will cause
the system to turn off the vertical and
horizontal synchronization ports and write
blanks to the video buffer. Blank Screen:
This option only write blanks to the video
buffer. DPMS Supported: Initial display
power management signaling.
V/H SYNC+Blank
Blank Screen
DPMS Supported
Modem Use IRQ This setting names the interrupt request
(IRQ) line assigned to the modem (if any)
on your system. Activity of selected IRQ
always awakens the system. 3 , 4, 5, 7, 9, 10, 11, AUTO.
Resume by Alarm Use this option to set the date and time for
your computer to boot up.
Date (of month) Alarm* - Indicate the month
for system to boot up. Set it to 0 if you want
to boot up everyday.
Time (hh:mm:ss) Alarm* - Indicate the hour,
minute and second for system to boot up.
Disabled
Enabled
*Set Resume by Alarm to
Enable, then press “Enter”
to show the range of Date
and Time Alarm.
Wake-Up by PCI Card Use PCI Wake-up system. PCI must meet
PCI 2.2 specification Disabled
Enabled
Soft-off by PWR-BTTN This feature allows users to configure the
power button function Instant Off: The power
button functions as a
normal power on/off button
Delay 4 Sec: When you
press the power button,
the computer enters the
suspend/sleep mode, but if
the button is pressed for
more than four seconds,
the computer will be turned
off.
Parameter Description Options