Acer Aspire T100, Service Manual

Page: 34 / 113

Chapter 2 27
IDE Primary Channel Slave Allows you to configure the hard disk drive
connected to the slave port of IDE channel
To enter the IDE Primary Slave setup,
press [Enter].
The IDE CD-ROM is always automatically
detected.
IDE Device Model Number:
None
IDE Secondary Channel
Master Allows you to configure the hard disk drive
connected to the master port of IDE
channel 2.
To enter the IDE Secondary Master setup,
press [Enter].
The IDE CD-ROM is always automatically
detected.
IDE Device Model Number:
None
IDE Secondary Channel
Slave Allows you to configure the hard disk drive
connected to the slave port of IDE channel
2.
To enter the IDE Secondary Slave setup,
press [Enter].
The IDE CD-ROM is always automatically
detected.
IDE Device Model Number:
None
Drive A Allows you to configure your floppy drive A. 1.44 MB, 3.5-inch
None
360 KB, 5.25-inch
1.2 MB, 5.25-inch
720 KB, 3.5-inch
2.88 MB, 3.5-inch
Drive B Allows you to configure your floppy drive B. 1.44 MB, 3.5-inch
None
360 KB, 5.25-inch
1.2 MB, 5.25-inch
720 KB, 3.5-inch
2.88 MB, 3.5-inch
Video This item specifies the type of video card in
use. The default setting is VGA/EGA.
Since current PCs use VGA only, this
function is almost useless and may be
disregarded in the future. VGA/EGA
CGA40
CGA80
Mono
Halt On This parameter enables you to control the
system stops in case of Power On Self Test
errors (POST). All Errors
No Errors
All but Keyboard
All but Diskette
All by Disk/Key
Base Memory Refers to the option of memory that is
available to standard DOS programs. DOS
systems have an address space od 1MB,
but the top 384KB (called high memory) is
reserved for system use. This leaves 640
KB of conventional memory. Everything
above 1MB is either extended or extended
memory.
Parameter Description Options