Acer Aspire Predator G7700 Series, User Manual

Page: 83 / 136

71
English
(1) Start the nForce Setup program to open the NVIDIA Windows
nForce Drivers page.
(2) Select the modules you want to install, then follow the onscreen
instructions to finish installation.
b Open the NVIDIA Control Panel by right-clicking on the desktop and
selecting NVIDIA Control Panel.
c From the Select a Task pane under the Storage category, select Create
array to start the Create Array Wizard and follow the onscreen
instructions to complete disk array creation.
Press F1 to access the online help for more information on array
creation process.
3 Perform steps 5 and 6 of the “To create a non-bootable RAID array using
the RAID BIOS” section.
To create a bootable RAID array using RAID BIOS:
1 Perform steps 1 through 4 of the “To create a non-bootable RAID array
using the RAID BIOS” section.
2 Create a bootable array.
a
Use the arrow keys to select the array that you want to set up as a
bootable disk.
b Press B to specify the array as bootable.
c Press Enter to view and verify details for the selected array.
The Array Detail screen shows various information about the array
that you selected, such as Stripe block, RAID mode, Stripe width, Disk
model name, and Disk capacity.
From the Array Detail screen, you can do the following: