Acer Aspire Predator G7700 Series User Manual Download Page 105

Page: 105 / 136

English

Removing and installing an optical

drive

The system supports a variety of storage devices for additional storage capacity
and scalability.

To remove an optical drive:

Perform the preinstallation instructions described on page 84.

Remove the front bazel.

Disconnect the power and data cables from rear of the old drive.

Move the release slider of the selected drive to the unlock position.

Pull the drive out of the device bay.

Observe the post-installation instructions described on page 85.

To install a new optical drive:

Perform steps 1 through 5 of the previous section.

Remove the new optical drive from its protective packaging.

Slide the new optical drive into the empty drive bay.

Summary of Contents for Aspire Predator G7700 Series









































































































































Search results

Summary of Contents for Aspire Predator G7700 Series

Reviews:

Related manuals for Aspire Predator G7700 Series

Brands by name

Popular brands

Acer Aspire Predator G7700 Series, User Manual

Search results

Summary of Contents for Aspire Predator G7700 Series

Reviews:

Related manuals for Aspire Predator G7700 Series

Brands by name

Popular brands