manualshive.com logo in svg

Acer Aspire Predator G Series, User Manual

Share
Download
Acer Aspire Predator G Series User Manual Download Page 67

55

English

USB devices

Universal Serial Bus (USB) is a serial bus design capable of cascading peripherals 
such as a digital camera, keyboard, mouse, scanner, printer, modem, flash 
drives, VoIP phones, and gaming devices (such as joystick, steering wheels, 
rumble pads, or foot pedals). With USB, complex cable connections can be 
eliminated.

Your computer comes with several external USB ports: one on the multi-media 
card slot, four on the front and four on the rear panel. These ports support USB 
2.0 high-performance external devices such as webcams and digital still 
cameras. They also allow you to connect additional USB devices to your 
computer without using up its resources.

To connect a USB device, simply plug the device cable into any of the USB ports 

 located on the front and rear panels of your computer.

Note: The USB devices shown below are for reference only. Actual device 

models may vary by geographic region.

Note: Some USB devices have a built-in USB port which permits you to 

connect more USB devices.

 

Summary of Contents for Aspire Predator G Series









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands