Acer Aspire G Predator User Manual Download Page 61

Page: 61 / 106

Eng

lis

Connecting a video game console

The computer’s DualNet feature allows you to use your computer as a router
and share Internet connection with a video game console, such as an Xbox
console.

To connect and share Internet connection with a video game
console:

Before connecting any cables, turn off your computer and video game console.

Connect the computer to the network. See page 31 for detailed instructions.

Connect one end of the network cable on the network port on the rear of the

computer, then connect the other end of the network cable to the network jack on

the rear of the video game console.

Turn on your computer.

Configure the Windows ICS (Internet Connection Sharing) to share your Internet

connection. Refer to the help documentation of your operating system for more

information.

Note: Refer to the documentation that came with your video game console

for detailed connection and configuration information.

Summary of Contents for Aspire G Predator











































































































Search results

Summary of Contents for Aspire G Predator

Reviews:

Related manuals for Aspire G Predator

Brands by name

Popular brands

Acer Aspire G Predator, User Manual

Search results

Summary of Contents for Aspire G Predator

Reviews:

Related manuals for Aspire G Predator

Brands by name

Popular brands