Aspire easyStore
13
IP Settings
To use this page, you will need to select any Aspire easyStore found by this utility on the
Search Device page first.
DHCP Client
By default, the Aspire easyStore device is configured with the DHCP client function
enabled. It means the Aspire easyStore will automatically look for any DHCP server and
request the server to assign an IP address to it when booting up. If you would like to set
the IP address of your Aspire easyStore manually, you will need to disable this function
first.
IP
Please fill in the IP address you would like to assign to the Aspire easyStore here. This
function cannot be used unless the DHCP Client function is set to disabled.
Netmask
Please fill in the Subnet Mask you would like to assign to the Aspire easyStore here. If you
do not know how to set this value, please check your home network router settings first.
This function cannot be used unless the DHCP Client function is disabled.
Gateway
Please fill in the Gateway IP address of your home network. This IP address is usually your
home network router IP address. This function cannot be used unless the DHCP Client
function is disabled.
Modify
You will need to click this button to send the configuration you updated to the Aspire
easyStore. If you leave this page before clicking the Modify button, all changes you made
Summary of Contents for Aspire esayStore
