Acer Aspire 9920G Series Service Manual Download

Page: 84 / 114

Chapter 4

Check the Power Adapter

Unplug the power adapter cable from the computer and measure the output voltage at the plug of the power
adapter cable. See the following figure

If the voltage is not correct, replace the power adapter.

If the voltage is within the range, do the following:

Replace the System board.

If the problem is not corrected, see “Undetermined Problems” on page 96.

If the voltage is not correct, go to the next step.

NOTE:

An audible noise from the power adapter does not always indicate a defect.

If the power-on indicator does not light up, check the power cord of the power adapter for correct
continuity and installation.

If the operational charge does not work, see “Check the Battery Pack” on page 83.

Pin 1: +19 to +20.5V

Pin 2: 0V, Ground

Summary of Contents for Aspire 9920G Series



















































































































Search results

Summary of Contents for Aspire 9920G Series

Reviews:

Related manuals for Aspire 9920G Series

Brands by name

Popular brands

Acer Aspire 9920G Series, Service Manual

Search results

Summary of Contents for Aspire 9920G Series

Reviews:

Related manuals for Aspire 9920G Series

Brands by name

Popular brands