Acer Aspire 9110, Service Manual, Page: 44 / 122

38 Chapter 1
Hardware Specifications and Configurations
NOTE: If you need to check PXE version, press F2 to enter BIOS then enable boot from LAN function. After
that, power off the system and remove the HDD. Last, reboot the laptop. Then you will see PXE version
displaying on the screen.
Processor
Item Specification
CPU type
Intel
®
Core
TM
Duo processor T2300/T2400/T2500/T2600 (2 MB L2 cache,
1.66/1.83/2/2.16 GHz, 667 MHz FSB) or higher
Core logic
Intel
®
945PM Express ICH7
CPU package Intel socketable 478pin Micro-BGA
CPU core voltage 0.944~1.3V
BIOS
Item Specification
BIOS vendor Phneoix
BIOS Version V1.03(MP version)
BIOS ROM type Flash ROM
BIOS ROM size 512KB
BIOS package 32-pin PLCC
Supported protocols ACPI 1.0b, PC Card 95, SM BIOS 2.3, IEEE1284-ECP/EPP, PCI 2.2, WFM
2.0, PnP 1.0a, DMI 2.0, PS/2 keyboard and mouse, USB 2.0, VGA BIOS,
CD-ROM bootable, IEEE 1394, PXE
BIOS password control Set by setup manual
Second Level Cache
Item Specification
Cache controller Built-in CPU
Cache size 2MB
1st level cache control Always enabled
2st level cache control Always enabled
Cache scheme control Fixed in write-back
System Memory
Item Specification
Memory controller
Built-in Intel
®
945PM
Memory size 0MB (no on-board memory)
DIMM socket number 2 sockets
Supports memory size per socket 2GB
Supports maximum memory size 4GB (by two 1024MB SO-DIMM module)
Supports DIMM type DDR 2 Synchronous DRAM
Supports DIMM Speed 533/667 MHz
Supports DIMM voltage 1.8V and 0.9V
Supports DIMM package 200-pin soDIMM
Memory module combinations You can install memory modules in any combinations as long as they
match the above specifications.