Acer Aspire 5737Z Series Service Manual Download Page 16

Page: 16 / 188

Chapter 1

NOTE:

The Power and Battery indicators are visible even when the computer cover is closed

Closed Front View

Power

Indicates the computer's power status.

Battery

Indicates the computer's battery status.

Charging: The light shows amber when the

battery is charging.

Fully charged: The light shows green when in AC

mode.

Programmable
key

User-programmable

Mail

Email application (user-programmable)

Bluetooth
communication
button/indicator

Enables/disables the Bluetooth function.

Indicates the status of Bluetooth communication.

Wireless
communication
button/indicator

Enables/disables the wireless LAN function.
Indicates the status of wireless LAN
communication.

HDD

Indicates when the hard disk drive is active.

Caps Lock

Lights up when Caps Lock is activated.

Num Lock

Lights up when Num Lock is activated.

Speakers

Left and right speakers deliver stereo audio output.

No.

Icon

Item

Description

5-in-1 Card
Reader

Accepts Secure Digital (SD), MultiMediaCard
(MMC), Memory Stick (MS), Memory Stick Pro (MS
PRO), and xD-Picture Card.

Note:

Push to remove/install the card. Only one

card can operate at any given time.

No.

Icon

Item

Description

Summary of Contents for Aspire 5737Z Series





























































































































































































Search results

Summary of Contents for Aspire 5737Z Series

Reviews:

Related manuals for Aspire 5737Z Series

Brands by name

Popular brands

Acer Aspire 5737Z Series, Service Manual

Search results

Summary of Contents for Aspire 5737Z Series

Reviews:

Related manuals for Aspire 5737Z Series

Brands by name

Popular brands