Acer Aspire 5538 Series Service Manual Download Page 24

Page: 24 / 226

Chapter 1

Special Keys

You can locate the Euro symbol and the US dollar sign at the upper-center and/or bottom-right of your
keyboard.

The Euro symbol

Open a text editor or word processor.

Hold <Alt Gr> and then press the <5> key at the upper-center of the keyboard.

NOTE:

Some fonts and software do not support the Euro symbol. See

www.microsoft.com/typography/faq/

faq12.htm

for more information.

The US dollar sign

Open a text editor or word processor.

Hold

<Shift>

and then press the

<4>

key at the upper-center of the keyboard.

NOTE:

This function varies according to the language settings.

Summary of Contents for Aspire 5538 Series



































































































































































































































Search results

Summary of Contents for Aspire 5538 Series

Reviews:

Related manuals for Aspire 5538 Series

Brands by name

Popular brands

Acer Aspire 5538 Series, Service Manual

Search results

Summary of Contents for Aspire 5538 Series

Reviews:

Related manuals for Aspire 5538 Series

Brands by name

Popular brands