manualshive.com logo in svg

Acer ASPIRE 5532, Service Manual, Page: 47 / 203

Share
Download
Acer ASPIRE 5532 Service Manual Download Page 47

Chapter 2

37

Using DMITools

The DMI (Desktop Management Interface) Tool copies BIOS information to EEPROM to be used in the DMI 
pool for hardware management. 

When the BIOS displays 

Verifying DMI pool data

 it is checking that the table correlates with the hardware 

before sending to the operating system (Windows, etc.).

To update the DMI Pool, perform the following steps:

1.

Boot into DOS.

2.

Execute 

dmitools

. The following messages report to screen to confirm completion:

•

dmitools /r ==> Read dmi string from bios

•

dmitools /wm xxxx ==> Write manufacturer name to eeprom (max. 16 characters)

•

dmitools /wp xxxx ==> Write product name to eeprom (max. 16 characters)

•

dmitools /ws xxxx ==> Write serial number to eeprom (max. 22 characters)

•

dmitools /wu xxxx ==> Write uuid to eeprom

•

dmitools /wa xxxx ==> Write asset tag to eeprom (max. 32 characters)

The following examples show the commands and the corresponding output information.

Read DMI Information from Memory

Input:

 

dmitools /r

Output:

Manufacturer (Type1, Offset04h): Acer

Product Name (Type1, Offset05h): TravelMate xxxxx

Serial Number (Type1, Offset07h): 01234567890123456789

UUID String (Type1, Offset08h): xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx

Asset Tag (Type3, Offset04h): Acet Asstag

Write Product Name to EEPROM

Input:

dmitools /wp Acer

Write Serial Number to EEPROM

Input:

dmitools /ws 01234567890123456789

4 ). Write UUID to EEPROM ( Create UUID from Intel WFM20.pdf )

Input:

dmitools /wu

5). Write Asset Tag to EEPROM

Input:

dmitools /wa Acer Asstag

NOTE: 

When using any of the Write options, restart the system to make the new DMI data effective.

Summary of Contents for ASPIRE 5532












































































































































































































Reviews:

No comments