manualshive.com logo in svg

Acer ASPIRE 5532, Service Manual, Page: 44 / 203

Share
Download
Acer ASPIRE 5532 Service Manual Download Page 44

34

Chapter 2

Remove HDD/BIOS Password Utilities

This section provides you with details about removing HDD/BIOS password:

Remove HDD Password:

If you key in the wrong HDD password three times, an error is generated.

To reset the HDD password, perform the following steps:

1.

An error code is generated for unlocking the HDD. Note down this code.

2.

Execute the 

UnlockHD.EXE

 file to create the unlock code in DOS Mode using the format 

UnlockHD  

[Encode code]

 with the code noted in the previous step, as follows:

UnlockHD  76943488

3.

Select 2 to obtain the password. This password which can be used for unlocking the HDD.

Password :46548274

4.

Shut down the computer by pressing down the Power button for 4 seconds.

5.

Turn on the computer and key in the password to unlock the HDD.

Summary of Contents for ASPIRE 5532












































































































































































































Reviews:

No comments