96
Chapter 3
Replacing the Mainboard
1.
Place the Mainboard in the chassis, left edge first
(1), then rotate it downward into position (2).
NOTE:
Ensure the left side I/O ports are positioned
correctly through the casing.
2.
Replace the one (1) securing screws in the
mainboard.
3.
Turn the computer over and replace the DC-In
cable.
4.
Turn the computer over. Feed the mircophone
cable through the guides on the fan.
5.
Reattach the microphone cable.
6.
Starting from the top and sliding downwards, use
your finger to secure the adhesive.
1
2
Summary of Contents for Aspire 4820T Series
