Chapter 3
37
8.
Remove the wireless WAN module from its connector.
NOTE:
When attaching the antenna back to the wireless WAN module, make sure the cable are arranged
properly.
Removing the WLAN Module
1.
See “Removing the Battery Pack” on page 30.
2.
See “Removing the SD Dummy Card” on page 31.
3.
See “Removing the Back Cover” on page 32.
4.
See “Removing the DIMM Modules” on page 33.
5.
See “Removing the Hard Disk Drive Module” on page 34.
6.
See “Removing the Wireless WAN Module” on page 36.
7.
Remove the label sticker from the WLAN module.