Acer Aspire 1510 Series, Service Manual

Page: 42 / 121

34 Chapter 2
Advanced
The Advanced menu screen contains parameters involving your hardware devices. It also provides advanced
settings of the system.
The table below describes the parameters in the screen. Settings in boldface are the default and suggested
parameter settings.
Parameter Description Options
Infrared Port Selects serial port address and IRQ.
Disabled
/Enabled/Auto
Parallel Port Selects parallel port address and IRQ. Enabled
/Disabled/Auto
Mode Allows user to specify the operating mode of parallel
port.
Note: Shows up if Parallel Port is set to Auto or
Enabled.
ECP
, EPP, Bi-directional, or Output
only
Base I/O address Allows the user to choose the resource if the
‘Parallel Port’ is set to ‘Enable’.
Note: Shows up if Parallel Port is set to Enabled.
378h
/278h
Interrupt Sets the interrupt request of the parallel port. IRQ7
/IRQ5
PhoenixBIOS Setup Utility
Information Main Advanced Security Boot Exit
Item Specific Help
Infrared Port(FIR):
Base I/O address:
Interrupt:
DMA channel
Configure Infrared Port
using options:
[Disable]
No configuration
[Enabled]
User configuration
[Auto]
BIOS or OS chooses
configuration
(OS Controlled)
Displayed when controlled
by OS
F1 Help ↑ ↓ Select Item F5/F6 Change Values F9 Setup Defaults
Esc Exit
← →
Select Menu Enter Select
4
Sub - Menu F10 Save and Exit
Parallel port:
Mode:
Base I/O address:
Interrupt:
DMA channel
[Enabled]
[2F8]
[IRQ 3]
[DMA1]
[Enabled]
[ECP]
[378]
[IRQ 7]
[DMA3]