Acer AR160 F1 Series, User Manual

Page: 91 / 162

75
• TPM Owner - Select Enable install to allow the TPM Owner to
install devices/programs. Select Disable install to prevent the TPM
Owner from installing devices/programs. Select
Don't change
to
keep the current TPM Owner Privilege setting. Select
Clear
to
remove the current TPM owner from the TPM Owner list.
• Execute TPM Command - Select Enabled to allow the user to
change executable TPM commands. Select Don't Change to keep
the current TPM settings.
• TPM Enabled/Disabled Status: Indicates if TPM support is enabled
or disabled.
• TPM Owner Status: Displays the TPM Owner status.
General WHEA (Windows Hardware Error
Architecture) Configuration
WHEA Support : Select Enabled to enable Windows Hardware Error
Architecture (WHEA) support, which will provide a common
infrastructure for handling hardware errors on Windows platforms in
order to reduce system crashes due to hardware errors and to improve
system recovery and health monitoring.
View BMC System Event Log
This feature displays the BMC System Event Log (SEL). It shows the total
number BMC System Events. To view an event, select an Entry Number
and press <
Enter > to display the information as shown in the screen.
• Total Number of Entries
• SEL Entry Number
• SEL Record ID
• SEL Record Type
• Event Timestamp
• Generator ID
• Event Message Format Ver
• Event Sensor Type
• Event Sensor Number
• Event Dir Type
• Event Data.