Altos R910 Installation Configuration Guide
34
Drivers Required
For Windows 2000 Installation, the following device drivers are required.
Device
Version
Directory on EasyBUILD
Onboard ATI
Radeon 7000 VGA
8.221.0.0 \Disk\R910\onboard\VGA
Onboard Intel
E8501 Chipset
7.2.2.1001 \Disk\R910\onboard\Chipset
Integrated SAS
1.21.15.00
\Disk\r910\onboard\SAS\W2K
Onboard LSI 1030
SCSI Controller
1.9.11.0 \Disk\R910\onboard\SCSI\LSI\ultra320.
w2k
Onboard Broadcom
BCM5704 Gigabit
Ethernet
8.93.1.0 \Disk\R910\NIC\BCM\bcm_5704.w2k
Onboard USB 2.0
7.2.2.1001
The USB 2.0 driver is in the same
package with chipset driver.
SAS Hot-swap
backplane
5.0.6055.2 \Disk\r910\onboard\hsbp\sas\Windows\
Software Required
The management utility for the NIC can be found in the EasyBUILD 7.1 build
300 (or later).
Software
Version
Directory on EasyBUILD
Broadcom
Advanced Control
Suite
7.7.6 \APP\R910\NIC\BACS\2KXPWS03
Microsoft DirectX
8.0 or later
http://www.microsoft.com/windows/di
rectx/default.mspx
Installation Tips
NOTE. There is no built-in driver for integrated SAS in the Windows 2000. You
need an USB floppy for applying driver during the OS installation.
1.
As Windows 2000 can’t recognize the integrated SAS, you need to make a
driver diskette from the EasyBUILD 7.1 build 300 first before the
installation.
2.
Press F6 at the start of installation to provide the driver diskette.
3.
Select “ISI Logic Fusion-MPT Driver for SAS1068 (Windows 2000)” as
target driver
4.
After loading the driver from diskette, follow the normal procedure to
finish the installation.
Chipset Driver Installation
The Chipset Driver Installation is the same as integrated SCSI hardware RAID
enabled. Please refer to the Windows 2000 Advanced Server (with Integrated
