13 Altos R910 Installation Configuration Guide
Advanced Control
Suite
Configuring Integrated SAS Hardware RAID
Please refer to the Appendix B. for the integrated SAS hardware RAID
configuration.
Installation Tips
NOTE. There is no built-in driver for integrated SAS hardware RAID in the OS.
You need an USB floppy for applying driver during the OS installation.
1.
As Windows Server 2003 x64 can’t recognize the integrated SAS hardware
RAID, you need to make a driver diskette from the EasyBUILD 7.1 build
300 first before the installation.
2.
Press F6 at the start of installation to provide the driver disk for the
integrated SAS hardware RAID.
3.
Select “Intel SAS RAID Controller Driver (Server 2003 for x64)” as target
driver.
4.
After loading the RAID driver from diskette, follow the normal procedure
to finish the installation.
SAS Backplane Driver Installation
1.
There is an ESG-SHV, SCA HSBP M5.... SCSI Enclosure Device listed under
Other device in Windows Device Manager. It is the hot-swap SAS
backplane for R910.
2.
Right-click on the ESG-SHV, SCA HSBP M5.... SCSI Enclosure Device and
