29 Altos R910 Installation Configuration Guide
Utility (Windows 2000 Advanced Server) and click on Setup.
3.
Follow the instruction and use the default setting to complete the
Broadcom Advanced Control Suite installation.
Windows 2000 Advanced Server SP4 (with onboard LSI SCSI)
Below information describes how to manually install Microsoft Windows 2000
Advanced Server on Altos R910 with onboard LSI SCSI.
Drivers Required
For Windows 2000 Installation, the following device drivers are required.
Device
Version
Directory on EasyBUILD
Onboard ATI
Radeon 7000 VGA
8.221.0.0 \Disk\R910\onboard\VGA
Onboard Intel
E8501 Chipset
7.2.2.1001 \Disk\R910\onboard\Chipset
Onboard LSI 1030
SCSI Controller
1.9.11.0 \Disk\R910\onboard\SCSI\LSI\ultra320.
w2k
Onboard Broadcom
BCM5704 Gigabit
Ethernet
8.93.1.0 \Disk\R910\NIC\BCM\bcm_5704.w2k
Onboard USB 2.0
7.2.2.1001
The USB 2.0 driver is in the same
package with chipset driver.
Hot-swap
backplane
5.0.2195.1 \Disk\R910\onboard\HSBP
Software Required
The management utility for onboard SCSI and NIC can be found in the
EasyBUILD 7.1 build 100 (or later).
Software
Version
Directory on EasyBUILD
CIM Browser for
Windows
3.05.00 \APP\R910\SCSI\CIMBrowser\Windows\
Windows\vm
Broadcom
Advanced Control
Suite
7.7.6 \APP\R910\NIC\BACS\2KXPWS03
Microsoft DirectX
8.0 or later
http://www.microsoft.com/windows/d
irectx/default.mspx
Installation Tips
NOTE. There is no built-in driver for onboard LSI SCSI in the OS. You need an
USB floppy for applying driver during the OS installation.
1.
As Windows 2000 can’t recognize the onboard LSI SCS, you need to make
a driver diskette from the EasyBUILD 7.1 build 100 first before the
installation.
