Acer Altos R360 F2 Frequently Asked Questions Manual Download

Page: 69 / 101

Altos R360 F2 FAQ (Frequently Asked Questions)

22. SAS RAID (Integrated RAID Module RMS25CB040/RMS25CB080)

What RAID features can the integrated RAID Module RMS25CB040/RMS25CB080 support?

ANSWER:

ANSWER: Please refer to the table below.

Features

RMS25CB040

RMS25CB080

NOTE

SAS BP LED Control (through

SGPIO)

Yes

Hardware RAID

Yes

Cache Memory of RAID

1 GB

BBU (Battery Backup Unit)

Yes

Connector

Mini SAS 4i

(SFF-8087)

Mini SAS 4i

(SFF-8087)

Global Hot Spare

Yes

Dedicated Hot Spare

Yes

Audible Alarm

Yes

RAID Volume Support > 2 TB

Yes

Background Initialization

Yes

Disk Coercion

Yes

NCQ (Native Command

Queuing)

Yes

UEFI/EFI Support

Yes

NOTE 1. Not every OS can support disk space up to 2 TB.

NOTE 2. When RAID volume is created, it can be initialized on the background. RAID volume can be

immediately available without completing the fully initialization.

NOTE 3. Drive coercion refers to the ability of the RAID controller to recognize the size of the physical drives
that are connected and then force the larger drives to use only the amount of space available on the smallest

drive. Drive coercion as implemented in these RAID controllers also allows an option to map out a reserved

space to compensate for slightly smaller drive sizes that may be added later. This option allows 128 MB, and 1
GB of drive capacity to remain unused.

The coercion algorithm options are:

Option

Optionssss

Description

Note

None

The software does not coerce the drive capacity.

Default

128MB-way

The software rounds the drive capacity down to

the next 128MB boundary. Then, the software

rounds the drive capacity to the nearest 10MB

boundary. If the resulting capacity is larger than

the real drive size, the coerced capacity is rounded

down to the next 10MB boundary.

Summary of Contents for Altos R360 F2






































































































Search results

Summary of Contents for Altos R360 F2

Reviews:

Related manuals for Altos R360 F2

Brands by name

Popular brands

Acer Altos R360 F2, Frequently Asked Questions Manual

Search results

Summary of Contents for Altos R360 F2

Reviews:

Related manuals for Altos R360 F2

Brands by name

Popular brands