Acer Altos R360 F2 Frequently Asked Questions Manual Download Page 30

Page: 30 / 101

Altos R360 F2 FAQ (Frequently Asked Questions)

12. More Information

Where can I find more information of Altos R360 F2?

ANSWER:

ANSWER: Please refer to below documents:

Document Title

Description

Note

Altos R360 F2 What’s

New

Overview of new features &

technologies of Altos R360 F2.

Altos R360 F2 THOL

(Tested Hardware &

Operating System

List)

This document is intended to provide

users of the Altos R360 F2 with a

guide to the different hardware and

operating systems tested on this

platform.

Altos R360 F2 ICG

(Installation

Configuration Guide)

This document provides you a quick

OS installation guide on Altos R360

F2.

Where can I find more information about virtualization?

ANSWER:

ANSWER: Please get the virtualization information with below links:

http://www.intel.com/technology/virtualization/technology.htm

Summary of Contents for Altos R360 F2






































































































Search results

Summary of Contents for Altos R360 F2

Reviews:

Acer Altos R360 F2, Frequently Asked Questions Manual, Page: 30 / 101

Search results

Summary of Contents for Altos R360 F2

Reviews: