manualshive.com logo in svg

Acer Altos R300, User Manual

Share
Download
Acer Altos R300 User Manual Download Page 70

 4 BIOS Setup utility

56

Entering Setup

Power on the system to start the system POST (Power On Self Test) 
process. While booting, press the key combination 

Ctrl+Alt+Esc

 

simultaneously. 

The Configuration/Setup Utility main menu will appear.

Note:

 You must press 

Ctrl+Alt+Esc

 while the system is booting.  

This key combination does not work during any other time.

The system supports two Setup Utility levels:  Configuration and 
Advanced. 

If you are an advanced user, you may want to check the detailed 
configuration of your system.  Detailed system configurations are 
contained in the Advanced Level.  To view the Advanced Level, press  

F8 

while viewing the Configuration/Setup Utility main menu.  

The Key Help Guide (press <Alt+H> to activate) shows you how to 
move around the BIOS setup screen:

•

Use the 

Up

 and 

Down

 arrow keys to move around the Setup 

Utility screen.

•

Use  the 

Left

 and 

Right

 arrow keys to move to the next page or to 

return to the previous page if the setup screen has more than one 
page available.

•

Use the 

Page Up

, 

Page Down

, 

+

, or 

-

 keys to select the options if 

they are available.

•

Press 

Esc

 to return to the Main menu.

Note:

 The parameters on the screens shown in this User’s guide 

display default system values. These values may not be the same as 
those in your system. The grayed-out items on the screens have 
fixed settings and are not user-configurable.

aa r300.book  Page 56  Tuesday, March 4, 2003  9:39 AM

Summary of Contents for Altos R300



































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands