manualshive.com logo in svg

Acer Altos R300, User Manual

Share
Download
Acer Altos R300 User Manual Download Page 69

55

BIOS Setup utility

The BIOS Setup utility is a hardware configuration program built into 
your system's Basic Input/Output System (BIOS).  Since most systems are 
already properly configured and optimized, there is no need to run this 
utility.  However, if you encounter configuration problems and get the 
"Run Setup" message, you will need to run this utility.

The Setup program loads the configuration values in a battery-backed 
nonvolatile memory called CMOS RAM.  This memory area is not part 
of the system RAM which allows configuration data to be retained 
when power is turned off.

Note: 

If you repeatedly receive Run Setup messages, the battery 

may be bad.  In this case, the system cannot retain configuration 
values in CMOS.  Ask a qualified technician for assistance.

Before you run Setup, make sure that you have saved all open files.  
The system reboots immediately after you exit Setup.  

aa r300.book  Page 55  Tuesday, March 4, 2003  9:39 AM

Summary of Contents for Altos R300



































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands