Acer Altos G320 Series, User Manual

Page: 127 / 132

117
Configuring the SCSI/SCSI RAID HBA
This section shows how to create a RAID 1 (mirror) volume. This feature
requires the installation or presence of a LSI Logic 53C1030 SCSI
controller.
Using the SCSI HBA setup utility
During bootup, press Ctrl+C to enter the LSI Logic Configuration
screen.
Loading the HBA default settings
1 In the LSI Logic MPT SCSI setup screen, press F2 .
2 Select Global Properties , then select Restore Defaults .
3 Press Esc , then select Save changes then exit this menu .
4 Select 53C1020/53C1030 , then press Enter .
5 Select Restore Defaults , then press Enter .
6 Press Esc , then select Save changes then exit this menu .
Creating a RAID 1 volume with a hot spare disk
1 In the LSI Logic MPT SCSI setup screen, select 53C1020/53C1030 ,
then press Enter .
2 Select RAID Properties , then press Enter .
3 In the Array Disk field, press the spacebar.
If you change the settings in the Array Disk field, the following
messages appear:
F3 - Keep Data (Create 2 disk arrays)
Delete - Erase Disk (Create 2 to 6 disk arrays)
4 Press the Delete key to erase all data on the screen.
5 In the Hot Spare field, press the spacebar.
If you change the settings in the Hot Spare field, the following
messages appear:
AA G320_UG_EN.book Page 117 Tuesday, August 30, 2005 2:34 PM