Acer Altos G320 Series, User Manual

Page: 118 / 132

Appendix B: SATA RAID configuration 108
The indicator for the selected drive changes from
READY
to
ONLIN
A[ array number ]-[ drive number ]
.
For example,
ONLIN A1-
3
means disk drive 3 in array 1.
3 Press Enter after you finish creating the current array.
4 Press F10 to configure logical drives.
5 Set the RAID level for the logical drive by highlighting RAID , then
press Enter .
A list of the available RAID levels for the current logical drive
appears.
6 Select a RAID level, then press Enter .
7 Set the logical drive size by selecting Size , then press Enter .
By default, the logical drive size associates the available space in
the array(s) with the current logical drive.
8 Set the stripe size.
9 After defining the current logical drive, select Accept , then press
Enter .
10 Save the configuration when the CU prompts you to do so.
11 Initialize the logical drives. Refer to “Initializing logical drives” on
page 109 for detailed instructions.
AA G320_UG_EN.book Page 108 Tuesday, August 30, 2005 2:34 PM