Acer AL2023 Page 7 Service Manual Download

Page: 7 / 61

- 7 -

SPECIAL NOTES ON LCD MONITORS

The following symptoms are normal with LCD monitor and do not indicate a problem.

NOTES

Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power Switch

and then turn it on again to make sure the flicker disappears.

You may find slightly uneven brightness in the screen depending on the desktop pattern you use.

The LCD screen has effective pixels of 99.99% or more. It may include blemishes of 0.01% or less such as a

missing pixel or a pixel lit all of the time.

Due to the nature of the LCD screen, an afterimage of the previous screen may remain after switching the

image, when the same image is displayed for hours. In this case, the screen is recovered slowly by changing
the image or turning off the Power Switch for hours.

Summary of Contents for AL2023






























































Search results

Summary of Contents for AL2023

Reviews:

Related manuals for AL2023

Brands by name

Popular brands

Acer AL2023, Service Manual

Search results

Summary of Contents for AL2023

Reviews:

Related manuals for AL2023

Brands by name

Popular brands