Acer AcerPower F6, Service Manual

Page: 43 / 70

Chapter 2 35
Wake-Up by PME (Enabled)
The system can be turned off with a software command. If you enable this item, the system can
automatically resume if there is an incoming call on the PCI modem or PCI LAN card. You must
use an ATX power supply in order to use this feature. Use this item to do wake-up action if
inserting the PCI card.
Power On by Ring (Disabled)
The system can be turned off with a software command. If you enable this item, the system can
automatically resume if there is an incoming call on the modem. You must use the ATX power
supply in order to use this feature.
USB KB Wake Up from S3 (Enabled)
This item allows you to enable/disable the USB device wake-up function from S3/S4 mode.
PS2 Keyboard Wake-up (Disabled)
This item allows you to enable or disable the keyboard activity to awaken the system from power
saving mode.
PS2 Mouse Wake-up (Disabled)
This item can enable or disable the mouse movement to awaken the system from power saving
mode.
Resume by Alarm (Disabled)
Under ACPI (Advanced Configuration and Power Management Interface) you can create a
software power down. In a software power down, the system can be resumed by Wake Up
Alarms. This item lets you install a software power down that is controlled by the power button
on your system. If the item is set for Instant-Off, then the power button causes a software power
down. If the item is set for Delay four Sec., then you have to hold the power button down for
four seconds to cause a software power down.