Acer AcerPower F6, Service Manual

Page: 42 / 70

34 Chapter 2
Power Management Setup
This page sets up some parameters for system power management operation. Press <Esc> to
return to the main menu setting page.
ACPI Function (Enabled)
This item allows users to enable or disable the ACPI power management function.
ACPI Suspend Type (S3(STR))
You can use this item to define how your system suspends. In the default, S3 (STR), the suspend
mode is a suspend to RAM, i.e., the system shuts down with the exception of a refresh current to
the system memory.
Soft-Off by PWR-BTTN (Delay 4 Sec.)
Under ACPI (Advanced Configuration and Power management Interface) you can create a
software power down. In a software power down, the system can be resumed by Wake Up
Alarms. This item lets you install a software power down that is controlled by the power button
on the system. If the item is set to Delay 4 Sec., then you have to hold the power button down for
four seconds to cause a software power down.
Power On After Power Fail (Last State)
This item enables the system to restart automatically or return to its operating status.
Resume on LAN (Disabled)
The system can be turned off with a software command. If you enable this item, the system can
automatically resume on LAN. You must use an ATX power supply in order to user this feature.
Enable/Disable
ACPI support for
Operating System.
ENABLE: If OS
supports ACPI.
DISABLED: If OS
does not support
ACPI.
Help Item
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Power Management Setup
ACPI function Enabled
ACPI Suspend Type S3 (STR)
Soft-off by PWR-BTTN Delay 4 Sec
Power On After Power Fail Last State
Resume On LAN Disabled
Wake-Up by PME Enabled
Power On by Ring Disabled
USB KB Wake Up from S3 Disabled
PS2 Keyboard Wakeup Disabled
PS2 Mouse Wakeup Disabled
Resume by Alarm Disabled
F10: Save & Exit +/-/: Value Enter : Select ESC: Exit
F9: Optimized Defaults
F1:General Help
: Move