Acer 5335-2238 - Aspire - Celeron 2.16 GHz Service Manual Download Page 44

Page: 44 / 154

Chapter 2

Navigating the BIOS Utility

There are five menu options: Information, Main, Security, Boot, and Exit.

Follow these instructions:

To choose a menu, use the left and right arrow keys.

To choose an item, use the up and down arrow keys.

To change the value of a parameter, press

A plus sign (+) indicates the item has sub-items. Press

Enter

to expand this item.

Press

Esc

while you are in any of the menu options to go to the Exit menu.

In any menu, you can load default settings by pressing

. You can also press

F10

to save any

changes made and exit the BIOS Setup Utility.

NOTE:

You can change the value of a parameter if it is enclosed in square brackets. Navigation keys for a

particular menu are shown on the bottom of the screen. Help for parameters are found in the Item
Specific Help part of the screen. Read this carefully when making changes to parameter values.

Please

note that system information is subject to different models

Summary of Contents for 5335-2238 - Aspire - Celeron 2.16 GHz



























































































































































Search results

Summary of Contents for 5335-2238 - Aspire - Celeron 2.16 GHz

Reviews:

Brands by name

Popular brands

Acer 5335-2238 - Aspire - Celeron 2.16 GHz, Service Manual

Search results

Summary of Contents for 5335-2238 - Aspire - Celeron 2.16 GHz

Reviews:

Brands by name

Popular brands