INSTALLATION OF FILTER BOX
1. Use 7/16” threaded rod to mount filter box. The length of the threaded rod depends on the thickness of the wall or the
support structure.
2. Mark the hole pattern on a level wall, and drill all the way through the wall (See Fig. 1 and refer to included template).
3. Slide the threaded rod through mounting hole in filter box and drilled holes in the wall. Secure using nuts and
washers.
4. Make sure filter box is level as possible.
BOLT HOLE PATTERN FOR FILTER BOX
FIG. 1
MOUNTING LOCATIONS
The 73-501 filter box can be mounted to a variety of locations. The most common location is a masonry wall. Consulting
with your distributor or Ace Industrial representative can assist in recommending a method for mounting in your location.
4
Summary of Contents for 73-501
Page 13: ...13...