General Assembly
ARM
BLOWER
DUCT
FILTER BOX
The general order of the parts for 73-501 is an arm connected to a blower, and then the blower connected to the filter box,
as shown in the figure above.
Duct work will always be required when connecting the blower to the filter box.
Depending on the arm used, duct work may or may not be needed.
The filter box has internal mounting brackets. This allows the filter box to be mounted to a wall or support structure.
The blower is mounted to a bracket. The bracket is supplied with the blower. This bracket can into be mounted to a wall
or support structure.
Mounting the arm to the blower depends on what arm is being used. Select arms include a ‘direct-mount’ bracket that will
allow the user to mount the arm directly to the blower. Other arms will require connecting flanges and duct work. Please
see next section for detailed information on the arm being used.
Ace Industrial recommends spiral duct work for ducting between the blower and the filter box. Flex tubing may be used
for ducting between the arm and the blower.
3
Summary of Contents for 73-501
Page 13: ...13...
