FOR YOUR OWN SAFETY
1. Read all the instructions before using the fan heater.
2. Only connect the fan heater to a single-phase socket with a mains voltage as specified on the rating plate.
3. This appliance meets the electromagnetic compatibility requirements specified in EN 55104/95 with regard
to interference with radio and TV sets.
4. Do not leave your home while the appliance is in operation: ensure that the switch is in OFF(0) position
and the thermostat is in minimum position. Always unplug the appliance.
5. Keep combustible material such as furniture, cushions, bedding, paper, clothes, curtains etc. at least
100cm away from the fan heater.
6. If wall mounted, do not fix to a combustible material such as wood, synthetic or plastic surfaces. Do not
hang anything on or in front of the fan heater.
7. Always unplug the heater when not in use. Do not pull the cord to unplug the heater.
8. Keep the air inlet and outlet free from obstructions: at least 1m in front and 50cm behind the heater.
9. Do not install the heater directly below a socket.
10. Do not let animals or children touch or play with the fan heater. Pay attention! The air outlet gets hot during
operation (more than 8
0℃, or 175F).
11. Do not cover. If covered, there is the risk of overheating.
12. Do not use this fan heater in the immediate vicinity of a bath, a shower or a swimming pool.
13. Do not use this fan heater in areas where explosive gas is present or while using flammable solvents,
varnish or glue.
14. If the cord of this appliance is damaged, discontinue use of this product and contact the manufacturer for
further instructions.
15. Keep the fan heater clean. Do not allow any objects to enter the inlet or exhaust openings as this may
cause electric shock or fire damage to the heater.
INSTALLATION
The appliance requires no installation. It should be used solely as a portable appliance.
Portable appliances are not suitable for use in a bathroom.
OPERATION
-
Turn the thermostat knob (right) in a clockwise direction until it reaches the maximum setting .
-
Summer service(ventilation only): turn the knob to setting
-
Heating at reduced power: turn the knob(right) to setting
Ⅰ
(1000W).
-
Heating at full power: turn the(right) to setting
Ⅱ
(1200W)
-
Switching off: turn the knob(left) to setting
REGULATING THE THERMOSTAT
When the room has reached the required temperature turn the thermostat knob (where included) in an
anti-clockwise direction up to the point where the appliance switches off and not beyond. The temperature
Summary of Contents for HFTV-1
Page 1: ......
