4
Make sure that you install your unit on an even surface for minimal noise and vibration.
The unit must be installed near a grounded plug and the Bottom Tray Drain Outlet (on the back of the
unit) must be accessible.
•
Medium Philips screwdriver
• Tape measure or ruler
• Knife or scissors
• Saw (optional, to shorten Window Slider Adapter for narrow windows)
There are two adapters which when are attached to the flexible/extendable tube will allow connection
between the air conditioner and the window slide adapter. Each of the adapter rings attach to the tube
end in the same manner.
Begin with taking a small portion of the tube end and extend it out by grasping end with your fingers and
pulling out and away.
Before
You
Begin
Tools
Needed
STEP ONE:
Preparing
the Vent Tube
Assembly
Minimum unit to wall surface distance
Assembly
Preparation
