manualshive.com logo in svg

Accutome B-Scan Plus, User Manual

Share
Download
Accutome B-Scan Plus User Manual Download Page 40

20

Accutome

B-Scan Plus User Guide

In the next screen, make sure 

Install the Software 

Automatically (Recommended) 

is selected, then 

click on 

Next

.  The system will find the driver for 

the probe and the window 

Hardware Installation

 

will appear.  Click 

Continue Anyway

 and then 

Finish

.  

After the driver has been installed and all windows 
are closed, the window 

Found New Hardware 

Wizard 

will reappear.  You will need to repeat the 

above two steps one more time to finish the probe 
driver installation for this USB port.

2.

We recommend that you install the Accutome B-
Scan Plus probe driver on at least two USB ports 
in the event one port is already being used by 
another device.  The Accutome B-Scan Plus probe 
will not work properly on any USB port on which it 
has not been installed.  

To install the Accutome B-Scan Plus probe on 
another USB port, repeat section 1.  Be sure to 
unplug the probe from the current USB port and 
insert it into the new USB port to start setup of the 
new USB port.

3.

Unplug the Accutome B-Scan Plus probe from the 
USB port and eject the installation CD from the 
CDROM drive.  Reboot the computer by clicking 
on 

Start

, then 

Shut Down

, then 

Restart

, then 

OK

.  

4.

After the computer restarts, login (if necessary) to 
your account.  Wait until the desktop appears, then 
plug the probe into any of the USB ports that have 
been set up.  Wait 10 seconds after connecting the 
Accutome B-Scan Plus probe, then double click 
the Launch Accutome B-Scan.exe icon on the 
desktop to start the Accutome B-Scan Plus 
program.  

Please remember that the probe must 

be plugged into a USB port that has been set 
up before starting the program. 

 

Summary of Contents for B-Scan Plus













































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands