Accutech LC 1200, Manual

Page: 155 / 156

LC 1200 Manual Glossary G-3
Staff Alert Panel
(SAP) A display panel used to indicate to staff where an Alarm, Door Ajar, Loiter,
or Supervise warning condition has occurred; it employs bi-color LEDs, a
Piezo Buzzer, and digital logic to control its outputs.
Stagger Tuning
Stagger Tuning allows monitored zones to be located closer than the
normal minimum 70 feet distance by using different Tx operating
frequencies for adjacent zones.
Tag
Activator/Deactivator
(TAD) A device used to turn Tags on and off. A TAD can also, in short range,
detect low Tag batteries and detect Band Removal events.
Tag See ES 2200 System Tag, IS 3200 System Tag, or BR 4200 System Tag
Tag Test Station
(TTS) A TTS is used in conjunction with the Accutech Software for Tag
assignments.
Tamper alarm A Tamper alarm occurs when the LC unit cover is removed and the
Tamper Switch (S1) is disengaged.
Tamper Switch
The Tamper Switch is provided to prevent unauthorized access to the LC
unit. An alarm will be generated if the LC unit cover is removed.
Tx Activation Field A radio frequency field created by a Tx antenna to detect Tags. Doors,
hallways, elevators, stairwells, and other passageways that have a Tx
Activation Field are commonly referred to as a “monitored zone.”